GB/T 10068-2020
ActiveMechanical vibration of certain machines with shaft heights 56 mm and higher—Measurement, evaluation and limits of vibration severity
轴中心高为56mm及以上电机的机械振动 振动的测量、评定及限值
Application Summary AI generated
This standard specifies methods for measuring, evaluating, and limiting the vibration severity of rotating electrical machines with shaft heights of 56 mm and above. It is applied in manufacturing and quality testing contexts to ensure that motors, generators, and similar equipment operate within acceptable vibration levels, preventing mechanical failure and reducing noise. The standard is used by engineers and inspectors in factories and laboratories to verify compliance during production, commissioning, and routine maintenance.
Related Standards
NY/T 1223-2006
Biogas-powered generating sets
GB/T 755.2-2003
Methods for determininglosses and efficiency of rotating electrical machinery from tests(excluding machines for traction vehicles)
GB/T 997-2003
Classification of types of construction and mounting arrangements for rotating electrical machines(IM code)
GB/T 5321-2005
Measurement of loss and efficiency for electrical machine by the calorimetric method
GB/Z 32519.1-2016
1000MW Class Hydro-generator—Part 1: Technical Guide
GB/Z 32519.2-2016
1000MW Class Hydro-generators—Part 2: Testing And Inspecting Guide
GB/Z 32519.3-2016
1000MW Class Hydraulic-generator—Part 3: Quality Inspection Standards For Installation
GB/Z 20833.5-2023
Rotating electrical machines—The winding insulation—Part 5：Off-line measurement of partial discharge inception voltage under repetitive impulse voltage
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.